Skip to content

Mechanical Support

Mechanical Support & Repair

We keep vehicles and machines working. On the road side, full automobile mechanics: servicing, fault diagnosis, engines, brakes, suspension and vehicle electrics. On the plant side, machine diagnosis and repair for pumps, motors and gearboxes, conveyors and compressors, with alignment, bearings and lubrication done properly. Every job starts with finding the real cause.

Fault finding

Find the cause before the part

Replacing parts until a fault goes away is expensive. Pick a symptom to see how we work through it: check, narrow down the cause, repair, then prove the repair.

Symptom

Engine cranks but will not start

  • 01Read stored fault codes and live data with a diagnostic scanner.
  • 02Confirm fuel delivery: pump runs when the ignition is switched on, filter not blocked.
  • 03Check ignition (petrol) or glow plugs and injection (diesel).
  • 04Check the air intake is clear and the immobiliser recognises the key.

General workshop practice. Limits, torques and procedures come from the manufacturer for your vehicle or machine.

Mechanical Support

What we repair and maintain

  • Vehicle servicing

    Scheduled servicing for cars, light trucks and fleet vehicles: oils, filters, belts, fluids and a written check of what needs attention next.

  • Vehicle fault diagnosis

    Diagnostic scans, live data and road tests to find the cause of warning lights, poor running, starting and charging faults.

  • Engines, brakes and suspension

    Engine repairs, brake pads, discs and hydraulics, steering and suspension parts, replaced and tested before the vehicle goes back.

  • Machine diagnosis

    Vibration, temperature and noise checks on running machines to find wear early, with a clear report of what was found and why it matters.

  • Pumps, gearboxes and drives

    Repair and overhaul of pumps, gearboxes, couplings and motor drives, with parts sourced to the original specification.

  • Alignment, bearings and lubrication

    Shaft alignment, bearing replacement and lubrication routines that stop the same failure from coming back.

Have a project in mind?

Tell us what you need, and we will come back to you with a clear plan, not a sales pitch.

Get in Touch